Filter
Top Products
58 Raven CDMA User Guide for Verizon, version 2.23
• Some commands have specific parameters while other commands will take
whatever your type.
• Acceptable parameters and/or specific formats are in the parameters column.
• Required variable parameters are denoted with italicized text, ex. Dn. The n is
variable and noted in the parameters column.
• Optional parameters are denoted with square brackets [ ].
• Most commands with parameters can be entered with ? to read the current value
(for example, AT&D? will respond with “2” if the default has not been
changed).
• AT Commands are not case sensitive. A capital “E” is the same as a lower-case
“e”.
• If you enter a command which is recognized by the Raven, it will respond with
“OK”. If the command is not recognized, the response will be “ERROR”.
• Those commands applicable only to certain model numbers of the Raven will be
noted in the command column.
Information Commands
Most of the Commands in the “Information and Status” table, only, do not have any
parameters. They only provide information. These commands are repeated else
-
where in their respective categories as well.
Caution: Symbols listed with commands, such as *, /, &, or ?,
are part of the command and must be included. Commands with
symbols other than * may require PassThru mode.
Note: Some commands may be presented on more than one
table.