Alcatel Carrier Internetworking Solutions 6624 Switch User Manual


 
Dshell Troubleshooting Troubleshooting 802.1X
page 19-8 OmniSwitch Troubleshooting Guide September 2005
2:0 Direction = In-Out (0)
2:0 Source MAC addr. = 00.00.00.00.00.00
2:0 value = 0 = 0x0
To verify the sequence of the packet flow, set the below Dshell flags to troubleshoot the issue. The best
way to troubleshoot is to compare the failed case with good case.
2:0 nidbg> adDebugSetFilterFrame 0xffff
2:0 nidbg> adDebugSetFilterLevel 0xff
2:0 AD INFO-> 802.1x port config.rcv.: Msg.=0x4370000
2:0
2:0 AD INFO-> 802.1x port config.rcv.:
2:0 Slot=2,Msg.=0x4370000
2:0
2:0 AD INFO-> 802.1x's port broadcast egress traffic blocked:
2:0 Slot=2,Glb.port=0x22,User port=3
2:0 slnFlushPortVlanHandler(1623): count = 1
2:0 qDriverSendReadyToEsmDriver: zcSendto succeeded port 0x22
2:0
2:0 AD INFO-> EAPol pkt.rcv.from AAA's 802.1x:
2:0 Slot=2,Msg.=0x44ff800
2:0
2:0 AD INFO-> EAPol pkt.sent out:
2:0 Slot=2,Glb.port=0x22,User port=3,Frame=0x44fa000
2:0
2:0 AD INFO-> EAPol pkt.rcv.from AAA's 802.1x:
2:0 Slot=2,Msg.=0x4509800
2:0
2:0 AD INFO-> EAPol pkt.sent out:
2:0 Slot=2,Glb.port=0x22,User port=3,Frame=0x4506800
2:0
2:0 AD INFO-> No EAPol pkt., rcv.on 802.1x glb.port=0x22,user port=3: discarded:
2:0 Slot=2,802.1x port's state=3,Auth.Ctrl=1,Auth.Share=2,
2:0 Src.MAC addr.=00.0F.1F.D5.54.95,Cond.codes=0x4180,Frame=0x4662800
2:0
2:0 AD INFO-> No EAPol pkt., rcv.on 802.1x glb.port=0x22,user port=3: discarded:
2:0 Slot=2,802.1x port's state=3,Auth.Ctrl=1,Auth.Share=2,
2:0 Src.MAC addr.=00.0F.1F.D5.54.95,Cond.codes=0x4180,Frame=0x436f000
2:0
2:0 AD INFO-> EAPol pkt., rcv.on 802.1x glb.port=0x22,user port=3: sent to
802.1x CMM:
2:0 Slot=2,802.1x port's state=3,Auth.Ctrl=1,Auth.Share=2,
2:0 Src.MAC addr.=00.0F.1F.D5.54.95,Cond.codes=0x8080,Frame=0x4474800
2:0
2:0 AD INFO-> EAPol pkt.sent to AAA's 802.1x:
2:0 Slot=2,Glb.port=0x22,User port=3,Msg.=0x15cfd70
2:0
2:0 AD INFO-> 802.1x port config.rcv.: Msg.=0x4478000
2:0
2:0 AD INFO-> 802.1x port config.rcv.:
2:0 Slot=2,Msg.=0x4478000
2:0
2:0 AD INFO-> 802.1x's port broadcast egress traffic blocked:
2:0 Slot=2,Glb.port=0x22,User port=3
2:0
2:0 AD INFO-> EAPol pkt.rcv.from AAA's 802.1x:
2:0 Slot=2,Msg.=0x447d800