Filter
Top Products
page -76 OmniSwitch Troubleshooting Guide September 2005
debug ipc pools cmm
Displays IPC Pools on Chassis Management Modules (CMMs).
debug ipc pools CMM
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
N/A
Examples
-> debug ipc pools cmm
IPC Pools for CMM:
UrgentPool: Full size is 1024, remaining: 1024
In socket queues: 0 Not queued: 0:
In DMA queues: 0
ControlPool: Full size is 5096, remaining: 5096
In socket queues: 0 Not queued: 0:
In DMA queues: 0
NormalPool: Full size is 2024, remaining: 2024
In socket queues: 0 Not queued: 0:
In DMA queues: 0
JumboPool: Full size is 256, remaining: 255
Socket ID = 0x61, dest slot = 65, remote addr = 0x43430041, ipc status = G
Task ID = 0x4553de0, PayLoad Len= 972, ipc priority = 0x1, data ptr = 0x621a9
10
next = 0x0, pFreeQ = 0x6e9be10, data_offset = 0, free_list_num = 2
In socket queues: 0 Not queued: 1:
In DMA queues: 0
LocalPool: Full size is 64, remaining: 64
In socket queues: 0 Not queued: 0:
In DMA queues: 0
Release History
Release 5.1; command was introduced.