Filter
Top Products
OmniSwitch Troubleshooting Guide September 2005 page -27
Release History
Release 5.1; command was introduced.
Related Commands
output definitions
Debug Level The granularity of the debug messages. This number will be 10, 50, or
99, where the lower number is least specific.
error The error debug messages status. Error messages provide information
of program faults.
warning The warning debug messages status. Debugging messages show router
operation calls.
state The state debug messages status. State messages show the router state
in relation to its neighbors.
recv The received OSPF packet debug messages status.
send The status OSPF packet debug messages status.
flood The flood debug messages status.
spf The Shortest Path First (SPF) debug messages status.
lsdb The Link State Database (LSDB) debug messages status.
rdb The Routing Database (RDB) debug messages status.
age The aging debug messages status.
vlink The virtual link debug messages status.
redist The redistribution debug messages status.
summary The summary debug messages status. Summarization of routes can be
set for stubby areas and NSSAs.
dbexch The data base exchange debug messages status.
hello The hello debug messages status.
auth The authorization debug messages status.
area The area related debug messages status.
intf The interface related debug messages status.
mip The MIP operations debug messages status.
info The information debug messages status.
setup The setup debug messages status.
time The time debug messages status.
tm The DRC debug messages status.
ip ospf debug-level Configures OSPF debugging level.
ip ospf debug-type Configures type of OSPF traffic to debug.