Filter
Top Products
Troubleshooting 802.1X Dshell Troubleshooting
OmniSwitch Troubleshooting Guide September 2005 page 19-9
2:0
2:0 AD INFO-> EAPol pkt.sent out:
2:0 Slot=2,Glb.port=0x22,User port=3,Frame=0x4479000
2:0
2:0 AD INFO-> EAPol pkt.from supplicant, rcv.on 802.1x glb.port=0x22,user
port=3: sent to 802.1x CMM:
2:0 Slot=2,802.1x port's state=6,Auth.Ctrl=1,Auth.Share=2,
2:0 Src.MAC addr.=00.0F.1F.D5.54.95,Cond.codes=0x8080,Frame=0x447c800
2:0
2:0 AD INFO-> EAPol pkt.sent to AAA's 802.1x:
2:0 Slot=2,Glb.port=0x22,User port=3,Msg.=0x15cfe90
2:0
2:0 AD INFO-> 802.1x port config.rcv.: Msg.=0x4484000
2:0
2:0 AD INFO-> 802.1x port config.rcv.:
2:0 Slot=2,Msg.=0x4484000
2:0
2:0 AD INFO-> 802.1x's port broadcast egress traffic unblocked:
2:0 Slot=2,Glb.port=0x22,User port=3
2:0
2:0 AD INFO-> EAPol pkt.rcv.from AAA's 802.1x:
2:0 Slot=2,Msg.=0x4481800
2:0
2:0 AD INFO-> EAPol pkt.sent out:
2:0 Slot=2,Glb.port=0x22,User port=3,Frame=0x4488000
2:0
2:0 AD INFO-> DHCP pkt.from known src.MAC, rcv.on 802.1x glb.port=0x22,user
port=3: sent to UDP Relay NI:
2:0 Slot=2,802.1x port's state=4,Auth.Ctrl=1,Auth.Share=2,
2:0 Src.MAC addr.=00.0F.1F.D5.54.95,Cond.codes=0x4100,Frame=0x446c800
2:0
2:0 AD INFO-> DHCP pkt.from known src.MAC, rcv.on 802.1x glb.port=0x22,user
port=3: sent to UDP Relay NI:
2:0 Slot=2,802.1x port's state=4,Auth.Ctrl=1,Auth.Share=2,
2:0 Src.MAC addr.=00.0F.1F.D5.54.95,Cond.codes=0x4100,Frame=0x4483800
2:0
2:0 AD INFO-> ARP request, rcv.on 802.1x glb.port=0x22,user port=3:
2:0 Slot=2,802.1x port's state=4,Auth.Ctrl=1,Auth.Share=2,
2:0 Src.MAC known=0x1,Cond.codes=0x6000,Frame=0x44a4000
2:0
2:0 AD INFO-> ARP request, rcv.on 802.1x glb.port=0x22,user port=3:
2:0 Slot=2,802.1x port's state=4,Auth.Ctrl=1,Auth.Share=2,
2:0 Src.MAC known=0x1,Cond.codes=0x6000,Frame=0x4578000
2:0
2:0 AD INFO-> ARP request, rcv.on 802.1x glb.port=0x22,user port=3:
2:0 Slot=2,802.1x port's state=4,Auth.Ctrl=1,Auth.Share=2,
2:0 Src.MAC known=0x1,Cond.codes=0x6000,Frame=0x4678000
A packet capture that is more specific to EAPOL is done by setting bit-7 of the adDebugSetFilterFrame
Dshell command.