Filter
Top Products
page -6 OmniSwitch Troubleshooting Guide September 2005
debug 802.1q
Retrieves debugging messages for the tagged port selected.
debug 802.1q {slot/port | aggregate_id}
Syntax Definitions
slot The slot number to configure 802.1Q tagging.
port The port number to configure 802.1Q tagging.
aggregate_id The aggregate link number to configure 802.1Q tagging.
Defaults
N/A
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
Retrieves debugging messages for the tagged port selected.
Examples
-> debug 802.1q 5
Aggregate Status = aggregate up
-> debug 802.1q 3/1
Slot Status = slot up
Port Status = port up
GENERAL INFO ESM: USER PORT 1-12 = CORONADO PORT 0-11
GENERAL INFO ESM: USER PORT 13-24 = CORONADO PORT 16-27
GENERAL INFO GSM: USER PORT 1 = CORONADO PORT 12
GENERAL INFO GSM: USER PORT 2 = CORONADO PORT 28
HARDWARE INFO for slot = 3 and port = 1:
At reg_addr = 660012c, Ingress tag-untag:= 1:
At reg_addr = 6a00010, Eg tag-untag: = 1:
At reg_addr = 6601000,for protocol = 0,ing default vlan: = 1
At reg_addr = 6601080,for protocol = 1,ing default vlan: = 1
At reg_addr = 6601100,for protocol = 2,ing default vlan: = 1
At reg_addr = 6601180,for protocol = 3,ing default vlan: = 1
At reg_addr = 6601200,for protocol = 4,ing default vlan: = 1
At reg_addr = 6601280,for protocol = 5,ing default vlan: = 1
At reg_addr = 6601300,for protocol = 6,ing default vlan: = 1
At reg_addr = 6a70000, egress default vlan: = 1
At reg_addr = 6600118, protocol cam on/off: = 18 :
At reg_addr = 660011c, trusted/untrusted: = fff0fe6
At reg_addr = 6600130, secure/unsecure: = 18
At reg_addr = 6608020, for vlan = 8,spanning tree vector: = 1
At reg_addr = 6a00014, Eg force tag internal: = 0: