Filter
Top Products
OmniSwitch Troubleshooting Guide September 2005 page -181
debug systrace appid level
Adds or removes a sysTrace capture level for a specified application ID (i.e., subsystem).
debug systrace appid {app_id | integer} level {level | integer}
debug systrace no appid app_id
Syntax Definitions
app_id An application ID keyword value. Currently supported application IDs
are listed below.
appid integer A numerical equivalent value for the application ID. Currently
supported numeric equivalent values are listed below.
level The severity level keyword for the application ID (shown below). All
sysTrace events of the specified level and lower will be captured.
level integer A numerical equivalent value for the severity level (shown below).
Values may range from 1–9.
Supported Application IDs and Numerical Equivalents
802.1q - 7
aaa - 20
amap - 18
bridge - 10
chassis - 64
cli - 67
config - 66
dbggw - 89
diag - 0
distrib - 84
drc - 74
eipc - 26
epilogue - 85
ftp - 82
gmap - 19
gm - 9
health - 76
idle - 255
interface - 6
ip - 15
ipc-diag - 1
ip-helper - 22
ipc-link - 4
ipc-mon - 21
ipms - 17
ipx - 16
lanpower - 108
ldap - 86
linkagg - 12
mipgw - 70
module - 24
nan-driver - 78
ni-supervision - 5
nosnmp - 87
pmm - 23
policy - 73
port-mgr - 65
psm - 81
qdispatcher - 3
qdriver - 2
qos - 13
rmon - 79
rsvp - 14
session - 71
slb - 25
smni - 83
snmp - 68
ssh - 109
ssl - 88
stp - 11
system - 75
telnet - 80
trap - 72
vlan - 8
vrrp - 77
web - 69
Supported Levels Numeric Equivalents Description
off 1
Off.
alarm 2
Highest severity. The system is about to crash and reboot.
error 3
System functionality is reduced.
alert 4
A violation has occurred.
warning 5
A unexpected, non-critical event has occurred.
info 6
Any other non-debug message (default).
debug1 7
A normal event debug message.
debug2 8
A debug-specific message.
debug3 9
Lowest severity. A maximum verbosity debug message.