Filter
Top Products
To do a clean installation, follow these steps:
1 Start up your computer from the
Disk Tools
disk or the CD that came with your computer
(by pressing
x
-C with the CD in the drive as the computer starts up).
2 Find and open the Disk First Aid icon.
After Disk First Aid starts, follow the instructions on the screen. Disk First
Aid checks your hard disk for any problems.
3When Disk First Aid has finished checking your hard disk, choose Quit from the
File menu.
4 Open the Drive Setup program.
You use the Drive Setup program to update your hard disk.
5 In the list of drives, click your startup disk.
6 Open the Functions menu and choose Update Driver.
7When the update process is finished, quit Drive Setup.
8Shut down your computer.
9 Start up your computer from the first system software installer disk that you made with
the Floppy Disk Maker application.
The Installer’s Welcome screen appears. You may have to double-click the
System Software Installer icon to open the Installer program.
129
Diagnostic Techniques