Filter
Top Products
Procedures that are done by the customer before the upgrade
Issue 3.0 February 2002 17
6. To continue the backup, press Enter. Note that a CMSADM backup can take several
hours, depending on the speed of the system and the tape drive.
If only one tape is required, the system displays the following message:
7. Do one of the following:
● If only one tape is required, continue with Step 11.
● If more than one tape is required, the system displays the following message, and
you continue with Step 8:
8. Insert the next tape and press Enter to continue. When you insert the next tape, allow
it to rewind and reposition before you press Enter. Repeat this step for any additional
tapes.
After the system completes the backup, the system displays the following message:
Backing up files...
..................................................
..................................................
(dots continue to display as the system is backed up)
..................................................
XXXXXX
blocks
Tape verification
XXXXXX
blocks
Please label the backup tape(s) with the date and the
current CMS version (
r3vXxx.x
)
Backing up files...
..................................................
..................................................
(dots continue to display as the system is backed up)
..................................................
End of medium on “output”.
Please remove the current tape, number it, insert tape number
X
,
and press ENTER
XXXXXXX
blocks
Tape Verification
Insert the first tape
Press Return to proceed: