Filter
Top Products
Upgrading the system
Issue 3.0 February 2002 33
5. Log on as root.
6. Enter:
cd /
7. Load the CVUE Upgrade Tool CD.
The File Manager window may open. Move and click the cursor in an XTERM window.
8. After waiting about 15 seconds, enter mount to verify that the CD is detected.
The system displays a list of devices and file systems that are currently mounted. The
final line should show /cdrom/cvue.
9. Enter the following commands:
cd /cdrom/cdrom0
./cvue_extract
The extract process begins. To track the progress of the extract command from a
different XTERM window, or from a remote or local terminal, use the following
command:
tail -f /var/tmp/new/var/log/cvuelog
The system displays several messages as shown in the following example:
10. The CVUE tool next checks the tape and the tape drive. The system determines if the
tape is defective, write-protected, or not compatible with the tape drive. The system
displays the following message:
11. Depending on what the system determines about the tape and tape drive, one of the
following occurs:
● If the tool determines that the tape and tape drive are operational, the system does
not display any error messages, and the upgrade continues with Step 12.
Using /var/tmp/new as temporary directory.
CVUE VERSION:
vXcvueXX.X
Current CMS version is: r3v
Xxx.x
Testing tape on /dev/rmt/
X