Filter
Top Products
Upgrading the system
Issue 3.0 February 2002 59
Removing the upgrade files
The files used for the upgrade must be removed.
To remove the upgrade files:
1. Enter:
cd /cdrom/cdrom0
2. Do one of the following:
● If running the command locally at the console, enter:
./cvue_cleanup
● Optionally, if running the command remotely on a dial-up line, enter:
nohup ./cvue_cleanup | tee /nohup.out
!
CAUTION:
If the dial-up modem line drops after starting this command with nohup,
reconnect to the system, but DO NOT rerun this command. Use tail -f
/nohup.out to view the progress of the command. When finished viewing
the nohup.out file, press Del to break out of the command.
Note that since the number of files to remove is large, this procedure takes several
minutes to complete. When the files are removed, the system displays the following
message:
3. Enter:
cd /
4. Enter:
eject cdrom
5. Remove the CVUE Upgrade Tool CD. Save the CD with the other customer software in
case you have to run the upgrade tool again.
6. Continue with Migrating the customer’s data.
The cvue_cleanup process is complete...Wed Aug 23 13:56:00 MDT 2000
#