Filter
Top Products
Procedures that are done by the customer before the upgrade
Issue 3.0 February 2002 19
CMSADM backup for R3V8
The CMSADM backup for R3V8 is not service affecting. The backup can be done at any
time.
To do a CMSADM backup on an R3V8 system:
!
WARNING:
Verify that you are using the correct tape for the tape drive on your system.
Many of the tape cartridges look alike, and using the wrong tape can
damage the tape drive mechanism and tape heads.
1. Log on as root.
2. Enter
:
cmsadm
The system displays the CMS Administration menu:
3. Enter the number that corresponds to the backup option.
Depending on the configuration of your system, the system displays one of the
following options.
● If only one tape drive is available on the system, the system displays the following
message:
Continue with Step 5.
● If more than one tape drive is available for use by the system, the system displays a
message listing the different tape drives.
Call Management System Administration Menu
Select a command from the list below.
1) acd_create Define a new ACD
2) acd_remove Remove all administration and data for an ACD
3) backup Filesystem backup
4) pkg_install Install a feature package
5) pkg_remove Remove a feature package
6) run_pkg Turn a feature package on or off
7) run_cms Turn CentreVu CMS on or off
8) port_admin Administer Modems, Terminals, and Printers
Enter choice (1-8) or q to quit:
Please insert the first cartridge tape into <device name>.
Press ENTER when ready or Del to quit: