Filter
Top Products
Procedures that are done by the customer before the upgrade
Issue 3.0 February 2002 23
5. Enter the path for the backup device.
Note:
The default device name is /dev/rmt/0. However, the device name used
depends on the drive’s SCSI ID. Possible device names are:
The system backs up the Visual Vectors vector layouts and comments, and then
displays a message similar to the following:
/dev/rmt/0 Indicates the first noncompressing tape drive with
the lowest target address
/dev/rmt/1 Indicates the second noncompressing tape drive
with the second lowest target address
/dev/rmt/0c Indicates the first compressed-mode tape drive
with the lowest target address
/dev/rmt/1c Indicates the second compressed-mode tape
drive with the second lowest target address
Using
X
as backup device.
Starting backup of vector steps and layout files. Please wait...
Backup completed successfully.
Please remove tape and label it
XXXXXXXXXX