Filter
Top Products
3. Turn on the printer and configure using Telnet or other communications program.
4. Connect the printer’s radio cable to the printer’s serial port.
Serial Port
Radio Cable
5. Turn off the printer, wait a few seconds, and then turn on the printer.
Your printer is ready to use.
Setting up the 9493™ Using Direct Serial Connections
Use a serial cable or a USB cable for direct communication with the printer.
The USB port can function as either a serial port or a parallel port. Refer to
the System Administrator’s Guide for more information about changing the
USB port’s function.
1. Open the hinged cable door on the side of the printer by loosening the
two screws with a Phillips screwdriver.
6. Plug the DB9 connector into the DB9 port or plug a USB type A or USB
mini-B connector into the corresponding USB port as show.
7. Place the cable in one of the cable cavities.
DB9 cable shown
8. Turn on the printer and configure using Telnet or other communications
program. See Chapter 6, “Telnet Console Commands” for more
information.
9. Turn off the printer, wait a few seconds, and
then turn on the printer.
Your printer is ready to use.
USB mini-B cable
Installing the Software
The software works with Microsoft Windows NT 4, 2000, XP, and Vista™ operating
systems. Follow these steps to install the NetManager software and configure the print server.
You can also download the utility from our Web site.
1. Insert the Monarch® Printer Documentation CD-ROM (TC9X00SWP) into your computer.
2. Select Drivers & Utilities, then NetManager.
2-2 System Administrator’s Guide