Filter
Top Products
System Requirements
To use the Avalanche-enabled printer, you need the following:
the Wavelink Avalanche Manager Agent (version 3.6.3 or greater) and Console (version 3.6.0
or greater)
♦
♦
♦
the AVA package (SSCfg.AVA)
a wireless network
Before You Begin
1. Install the Avalanche Manager Agent and Console.
2. Open the Manager Agent.
3. Open the Avalanche Management Console.
4. Connect the Management Console to the agent.
5. Install the software package (SSCfg.AVA).
6. Select Configure Utility.
7. Click Configure Package to start the Sierra Sport Configurator.
When the application begins, the most recently-used session opens if one exists.
Otherwise, a new session begins.
When the printer is turned on, it appears in the Avalanche Management Console as a
client. Use the console to schedule the updates (new files or firmware) for each printer
(client). Depending on your application, this could be done once a day or every time the
printer is turned on.
Changing the Avalanche Directory
You need to specify the directory where Avalanche is installed, if the application does not
automatically find it for you.
1. Select Options from the File menu.
2. Browse to the directory and select OK.
3. Click OK to return to the application.
You see the Wireless Settings tab.
Use the following instructions to configure the print server.
5-2 System Administrator’s Guide