Filter
Top Products
Setting the Encryption
This option allows you to set the printer’s encryption method to None,
WEP 64, WEP 128, WPA, WPA2, or WPA2/WPA. The default is None (no encryption).
1. From the Configure menu, select Encryption.
A checkmark indicates the current setting.
2. Press D or U until you see the encryption you need, then press e to enable it and return to
the Configure screen. Press X to exit without saving changes.
Note: When you use encryption, you must set the keys to secure your network. See “Setting
the Encryption Keys” for more information.
Setting the Key Index
This option sets the key to use for the selected encryption method.
See “Basic Security Configurations” for more information on encryption keys.
1. From the Configure menu, select Keys.
2. Select Index.
You can select up to four 104-bit keys using keys 1-4, or up to two 128-bit keys using
keys 1 and 3.
3. Select the key you need and press e to save the setting or press X to exit without saving
changes. You return to the Keys menu.
4. Enter the key values. See “Setting the Encryption Keys” for more information.
Setting the Encryption Keys
Use this option to set the key values for encryption. Once you save a key and exit the option,
you cannot view the key values. There are four keys. Refer to “Basic Security Configurations” in
Chapter 4 for more information on setting encryption key values based on your encryption
method.
Note: Since you cannot view key values, keep a list of your key values in a safe place for
future reference.
After you set the key values, select a key to use based on your network’s encryption method.
See “Setting the Key Index” for more information.
1. From the Configure menu, select Keys.
Configuring the 802.11b/g and IP Settings 2-13