Filter
Top Products
Changing TCP/IP Settings
You can enable TCP/IP, select applications, set the IP Address, Subnet Mask, and more.
1. From the side menu, click TCP/IP.
2. Click the name of the enabled service to modify the TCP/IP parameters for that service. See
“Configuring Print Services” for more information.
3. You can change protocols, assign an IP address, subnet mask, gateway and more.
Note: If you disable the IP protocol, you will not be able to configure the printer from your
Web browser.
4. When you are finished, click Submit.
5. Click the reset link at the bottom of the screen. The Reset Server screen appears.
6. Click Submit and wait five seconds for the print server to reset.
Even though you submitted your changes, they do not take effect until you reset the print
server.
You must re-enter your access password to make any further changes to the printer
settings.
Using a Web Browser 4-5