Filter
Top Products
Setting the Network Card Update Password
When set, the network card update password allows you to change variables in the Web
browser and the remote console.
1. From the side menu, click Admin. The Web Admin Configuration screen appears.
2. Click Configure Network Card Update Password.
3. Enter a new network update password.
4. Retype the new password to confirm it.
5. Click Submit.
Configuring Network Protocols
1. Only configure the settings required for your network/printer. To enable or disable
protocols:
2. From the side menu, click Admin. The Web Admin Configuration screen appears.
3. Click Protocol Control.
4. Enable or disable your network protocols and IP protocols.
Note: If you disable the TCP/IP protocol, all IP protocols are disabled automatically.
5. Click Submit.
6. Click the reset link at the bottom of the screen. The Reset Server screen appears.
7. Click Submit and wait five seconds for the print server to reset.
Even though you submitted your changes, they do not take effect until you reset the print
server.
4-12 System Administrator’s Guide