Filter
Top Products
SAVE
Saves configuration settings.
CHange/SEt/DEFine
Sets configuration items.
SEt DEFAULT
Sets print server to factory defaults.
SEt LOAd [EN/DIS]
Enables or disables firmware reload after exit.
SEt LOAd HOst <name>
Sets node name of boot host (NetWare firmware load).
SEt LOAd IP aa.bb.cc.dd
Sets IP address of load host (TCP/IP firmware load).
SEt LOAd SOftware <filename>
Sets print server’s firmware filename to load.
SEt PAssword
Sets console password. The default password is access.
Note: The password is case-sensitive.
SEt PROtect <password>
Sets the update password.
SEt SERVEr DEScription
Sets mode description to string displayed with SHOW SERVER command.
SEt SERVEr NAme <name>
Sets server node name.
SEt SERVEr SYSLog [EN/DIS]
Enables or disables access to the system log.
SHow FATal
Shows the fatal error log.
SHow FREE
Shows the amount of available memory.
SHow LOAd
Shows the print server’s firmware update parameters.
SHow SERVEr
Shows the server parameters.
SHow SERVEr COunters
Shows the server statistics.
SHow SERVEr QUeue
Shows the print server internal queue.
SHow SERVEr SYSLog
Shows the system log, if access is enabled.
SHow TEstpage
Prints a test page.
SHow VErsion
Shows the server firmware version.
6-4 System Administrator’s Guide