Filter
Top Products
Configuring TCP/IP Settings
Use this tab to configure the TCP/IP settings.
1. Enter the various TCP/IP settings including IP Address, Subnet Mask, Gateway, Boot
Method, Boot Tries, and Timeouts as required.
2. Select any LPD or RARP settings.
3. Enter the DNS settings.
Specifying the IP Access Range
Use this tab to specify a range of acceptable IP addresses and Subnet Masks.
1. Click <<Add.
2. Enter the Starting Address.
3. Enter the Ending Address.
4. Click OK when finished.
5. Click Add>> to enter the Starting Address and Ending Address for
the Subnet Mask.
6. Click OK when finished.
Configuring Printranet Settings
Use this tab to configure the Printranet settings including POP3 and SMTP.
Configuring NetWare Settings
Use this tab to configure the NetWare settings including Frame Type, Password, and
Configure Bindery File Servers.
5-4 System Administrator’s Guide