Filter
Top Products
Setting Up the 9460™ Printer
Use these instructions to set up a 9460 printer using the printer’s RF Network menu in the
printer’s Tool Box.
1. Turn on the printer by pressing and holding the power button (P) until the display turns on.
The display flashes printer version information and battery charging status.
E B F
Init Radio……….
When you see “Init Radio”, the printer is waiting for the wireless print server to initialize.
Next, you may see
Ready
p <T>
Display Indicates
Ready
The printer is in Ready mode to send and receive data.
<T>
The printer is connected to a network (peer-to-peer or infrastructure
mode). Press A under <T> to display the printer’s IP address, then
press A under
to print a network information label with the device
name, IP address, and MAC address as a bar code. See “Printing a
Network Information Label” for more information.
Press any button to return to Ready mode.
The printer is not connected to a network.
2. Press A under p.
E B F
R X T
You see the battery indicator E (empty) and F (full). As you use the printer, the battery
indicator line gets closer to E (empty), instead of F (full). Recharge the battery when
the line is by the E.
3. Press T (Tool Box) to enter the menu.
Tool Box
Language
E D
4. Tool Box is highlighted. Press E to select Tool Box.
Enter Password
5. Press the navigational buttons in this order: Left, Left, Left, Right, and Left.
Diagnostics
Online Diag.
E D
2-4 System Administrator’s Guide