Filter
Top Products
4. Type access for the password. To change the password, see “Setting the Network Card
Access Password,” for more information.
The password is case-sensitive and saved in the printer’s flash memory.
5. Click Submit.
The Printer Status page appears with information about your printer, including printer name,
description, firmware version and more. Use the following sections to configure the print server
using your Web browser. Only configure the settings required for your network/printer.
Contacting Us
From the Printer Status page, click the Paxar link if you need to contact us.
Configuring the Server Settings
You can change the name, location, and other information for your server as well as set SNMP
parameters, reset the server and restore server default settings.
1. From the side menu, click Server Settings.
2. Enter your information and click Submit.
3. Click the reset link at the bottom of the screen. The Reset Server screen appears.
4. Click Submit and wait five seconds for the print server to reset.
Even though you submitted your changes, they do not take effect until you reset the print
4-2 System Administrator’s Guide