Filter
Top Products
Section 12: Monitoring the StorPoint CD
AXIS StorPoint CD E100 User’s Manual 111
Section 12 Monitoring the StorPoint CD
This section describes the following monitoring tools:
Event Log
The event log is stored in the logfile.txt file located in the
System/ServerProperties folder. In the event log, the StorPoint CD writes
information such as:
Information, e.g. completed tasks
Warnings, e.g. hard disk full
Errors, e.g. installation failures
To display the event log, follow these steps:
1. Start your Web browser, and enter the name or IP address of the StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the Server password. By default, this
is set to
pass. To change the password, see “Server Password” on page 24.
3. Click Event Log.
All events are viewed in the same order as they entered the log.
Notes: ❏ If a synchronization source has been found or if the correct date and time
have been set manually, date information will appear in the log file.
❏ When the server is restarted, a sub-set of critical events will remain in the
event log.
❏ Click Clear Event Log, to clear the event log of events.
Tools See ...
Event log page 111
Statistics page 112
E-mail page 113
SNMP page 113
AXIS ThinWizard - a tool for locating and managing
all the AXIS servers on your network
page 115