Filter
Top Products
Section 5: UNIX (NFS)
AXIS StorPoint CD E100 User’s Manual 67
Section 5 UNIX (NFS)
This section outlines the required configuration settings for running the
StorPoint CD in the UNIX (NFS) environment, how to set up access
restrictions and how to mount the StorPoint CD resources.
Note: ❏ Make sure you have set the Internet address as described in “Assigning an IP
Address” on page 13.
If you are using the StorPoint CD in a multiprotocol environment, proceed to
the other relevant sections of the manual, namely:
•“Section 3 - Microsoft & IBM Networks (SMB) ”
•“Section 4 - NetWare (NCP) ”
•“Section 6 - Macintosh (AFP) ”
•“Section 7 - FTP (File Transfer Protocol) ”
•“Section 8 - Web Browser (HTTP) ”
Network Settings
Use the Administration pages within the StorPoint CD Web interface to
configure the StorPoint CD.
1. Start your Web browser, and enter the name or IP address of the StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the User ID and the Server password.
By default, these are set to
root and pass. To change the Server password, see
“Server Password” on page 24.
3. Click Network Settings.
4. Click Detailed View . The Protocols dialog box appears.
5. Select the UNIX (NFS) tab and specify the settings.
6. Click OK.
Notes: ❏ Context sensitive online help is available for all parameters.
❏ The parameter list is described in detail in “Appendix A - Parameter List ” .