Filter
Top Products
Section 12: Monitoring the StorPoint CD
AXIS StorPoint CD E100 User’s Manual 113
E-mail (SMTP)
To specify the settings for your e-mail facilities:
1. Start your Web browser and enter the name or IP address of the StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the Server password. By default, this
is set to
pass. To change the server password, see “Server Password” on page 24.
3. Click Network Settings within the Administration Web pages.
4. Click Detailed View . The Protocols dialog box appears.
5. Select the E-mail (SMTP) tab. Specify the settings for the mail server.
6. Enter the Administrators e-mail address.
7. Select mail log events from the Mail Log Events drop down list. These will
be sent to the e-mail address specified above. Click OK.
SNMP
You can use SNMP (Simple Network Management Protocol) for remote
monitoring of the StorPoint CD.
General Information SNMP refers to a set of standards for network management, including a
protocol, a database structure specification, and a set of data objects. The
StorPoint CD SNMP implementation runs in the TCP/IP environment.
The management is handled by NMS (Network Management System) software
running on a host on your network. The NMS software communicates with
network devices by the means of messages, which are references to one or more
objects.
A message can be a question or an instruction to a device, or an alarm triggered
by a specific event in a device. Objects are contained in data bases called MIBs
(Management Information Base), where MIB-II is a standard database.
The StorPoint CD supports all relevant parts of MIB-II. It also includes a
private enterprise MIB, the AXIS MIB, which is described below.
System Requirements In order to make full use of the SNMP support, you will need an NMS software
that allows you to install private enterprise MIBs.