Filter
Top Products
Section 3: Microsoft & IBM Networks (SMB)
AXIS StorPoint CD E100 User’s Manual 41
Alternative Method If you do not have Peer for OS/2, you can map the StorPoint CD to a drive
letter using the
net use command. Follow these steps:
1. Open an OS/2 window.
2. Use the
net use command to mount the StorPoint CD. At the OS/2 prompt,
type:
net use <drive letter>: \\AXIS<nnnnnn>\<folder>
where <nnnnnn> are the six last digits of your StorPoint CD serial number and
<folder> is any shared StorPoint CD folder.
3. To make the connections permanent, create or edit your
startup.cmd file to
include your
net use commands.
DOS Follow these steps:
1. At the DOS prompt, type:
or:
where
<nnnnnn> are the six last digits of your StorPoint CD serial number
and
<folder> is the StorPoint CD folder you want to map.
2. To make the connections permanent, edit your
autoexec.bat file to include
your
net use commands.
Example 1 (Root level access):
To access the root level of your StorPoint CD with serial number
00408C18025C under the drive letter E, type:
Example 2 (Volumes folder access):
If your StorPoint CD serial number is 00408C18025C, and you want to be
able to access all the discs under the drive letter F, type:
Example 3 (Disc access):
If your StorPoint CD serial number is 00408C18025C, and you want to
map a disc named 44018881 to drive G, type:
net use <drive letter>: \\AXIS<nnnnnn>\<folder>
net use <drive letter>: \\<IP address>\<folder>
net use E: \\AXIS18025C\root
net use F: \\AXIS18025C\volumes
net use G: \\AXIS18025C\44018881