Filter
Top Products
Appendix A: Parameter List
AXIS StorPoint CD E100 User’s Manual 125
FTP You can retrieve the configuration parameters of your StorPoint CD using the
File Transfer Protocol (FTP). FTP is supported by most operating
environments.
Follow these instructions:
1. Log in to the StorPoint CD with the command:
where
<IP address> is the name or IP address of your StorPoint CD.
2. You will be prompted for user id and password. Use the user id
root, which
has the default password
pass.
3. Windows 95 only: Change directory not to overwrite any of your system files.
See the caution note below.
4. Change to the directory where the configuration file is located:
5. To access the configuration file, type:
6. Edit the
config file using any text editor. In the Windows 95/98 and
Windows NT environments, you can for example use Notepad. Once the
editing is complete, save the file as
config.
7. To upload the configuration file to the StorPoint CD, type
8. To exit FTP, type the command
quit, bye, or exit.
Caution! ❏ Windows 95 has a directory called
config that contains important system
files. It is therefore important to change to another directory using the
cd
command before modifying your StorPoint CD configuration file from
within the Windows 95 environment. Failure to do this may result in some
of your system files to be overwritten.
ftp <IP address>
cd System/ServerProperties
get config.ini
put config.ini