Filter
Top Products
Section 2: Installing the StorPoint CD
12 AXIS StorPoint CD E100 User’s Manual
Connecting the StorPoint CD to the Network
Before You Begin Always consult the Network Administrator before making changes to the
network configuration.
Procedure To connect the StorPoint CD to your network, follow these steps:
1. Turn off the power.
2. Connect the network cable to the appropriate connector, i.e. RJ-45 for
100baseTX and 10baseT.
3. Switch on the tower.
The StorPoint CD front panel indicators will flash during power-on and self-
test. When the Status indicator stops flashing and turns solid green, the
StorPoint CD is ready for use.
Network hub
Network cables
StorPoint CD
installed in a
CD-ROM tower