Filter
Top Products
Section 4: NetWare (NCP)
46 AXIS StorPoint CD E100 User’s Manual
3. Click admin. You will be prompted for the Server password. By default, this
is set to
pass. To change the Server password, see “Server Password” on page
24.
4. Click Network Settings.
5. Click Wizard . The Network Settings Wizard dialog appears.
6. Choose NetWare (NCP) to set up the StorPoint CD for your NetWare clients.
Click Start to proceed with the installation.
7. Follow the instructions on the screen. When finished, click Close.
8. Click Detailed View . The Protocols dialog box appears.
9. Select the NetWare (NCP) tab and verify the settings.
10. Click OK.
11. Restart your StorPoint CD.
Notes: ❏ Online help is available for all parameters.
❏ The parameter list is described in detail in “Appendix A - Parameter List ” .
Text Editor If you do not have TCP/IP on your network, follow these steps to install the
StorPoint CD as an NDS server:
1. Login as Supervisor in bindery mode.
2. Verify that the NDS tree is synchronized. To do that, you load
DSREPAIR.NLM
on a NetWare server console in the NDS tree and select
Unattended full
repair
.
Important! ❏ If the NDS tree is not synchronized, do not continue the installation until
you have solved the problem.