Filter
Top Products
Section 4: NetWare (NCP)
AXIS StorPoint CD E100 User’s Manual 63
5. Click Drive Connections. Double click AXIS<nnnnnn>_NW\SYS and then
open the VOLUMES folder.
Note: ❏ If the Show All Volumes parameter is set to yes, the individual discs are
shown at the same level as SYS. Some applications will not run properly
unless the data is stored at root level. To avoid such problems, assign a drive
letter to that particular disc.
6. Select a drive letter in the Drives listing.
7. In the Resources listing, select a StorPoint CD resource:
• AXIS<nnnnnn>_NW\SYS for root level access
• VOLUMES for access to all the discs
• the volume name for access to an individual disc, e.g. OFFICE
8. Click Map to map the StorPoint CD to the selected drive letter.
9. Click Permanent if you wish to use the resource under the same drive letter
the next time you start you computer.
Click the Exit button on the toolbar. The StorPoint CD is ready for use.