Filter
Top Products
Appendix A: Parameter List
126 AXIS StorPoint CD E100 User’s Manual
Text Editor If you do not have TCP/IP on your network, you can edit the StorPoint CD
parameter list and access control parameters via the text files. Use your preferred
text editor to make updates to the files.
You submit the new settings to the StorPoint CD by simply saving the files. To
activate the new settings it is necessary to restart the StorPoint CD. You can do
this by setting the Restart parameter to
yes.
Important! ❏ Do not restart the StorPoint CD in the middle of the NDS installation.
Configuration Settings The StorPoint CD configuration settings are stored in the
config.ini file
located in the
System/ServerProperties folder.
Example:
Access Control
Parameters
The StorPoint CD access control parameters are stored in separate text files for
each shared resource. These text files are located in the
System/VolumeProperties folder.
Notes: ❏ The text files cannot be used for setting up access rights for NetWare.
Instead, you can use standard NetWare tools such as NWAdmin or Filer.
❏ The text files cannot be used for setting up NT user-level rights for SMB.
Instead, you can use the Windows NT Explorer.
; AXIS StorPoint CD Parameter List, V5.31
[Server]
HardwareAddress = 00:40:cc:24:c3:0c
Date = 99-11-01
Time = 08:54:37
FactoryDefaults = no
Restart = no
TimeZone = UTC
TimeSyncSource = None
ServerPassword = ********
Shut Down = no
NetworkSpeed = auto
CDWritePassword = ********
[SCSI]
SCSITermination = on
JukeBoxLockTime = 0
Disconnect_Reselect = on
BusMode = Asynchronous
[IP]
InternetAddress = 192.16.253.80
DefaultRouter = 192.16.1.1
NetMask = 255.255.0.0
BOOTPEnable = yes
DHCPEnable = yes
RARPEnable = yes
...