Axis Communications CD E100 Server User Manual


 
Section 3: Microsoft & IBM Networks (SMB)
28 AXIS StorPoint CD E100 Users Manual
User-level
Access Control
User-level access control allows you to define rights for discs/volumes based on
whom the user logged into the domain as. The StorPoint CD will act as a
member server in the NT-domain and verify the users identity and group
memberships against a domain controller on the network. The advantages with
this method are:
The user is not required to answer to password prompts every time he/she
needs to access a protected disc or a volume.
The network administrator can administer the access rights for discs and
volumes using Windows NTs standard administration tools.
The network administrator can use the native user groups in the domain to
set basic security.
Share-level
Access Control
Share-level access control is based on different passwords for different shared
discs/folders. No verification with domain controllers will take place. This is a
good method to use in smaller workgroup based networks when there is no
domain controller.
Recommendation!
User-level access control is the preferred method to use in Windows NT server
based networks.
Wizard The installation wizard is a convenient way to set up your StorPoint CD for
your Windows (SMB) environment and it will guide you through the following:
Defining your server name and the workgroup/domain you want your
StorPoint CD to appear in.
Defining how you want to control access to shared resources.
To run the Wizard follow the steps outlined below:
1. Start your Web browser, and enter the name or IP address of the StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the Server password. By default, this
is set to
pass. To change the Server password, see Server Password on page
24.
3. Click Network Settings.
4. Click Wizard . The Network Settings Wizard dialog appears.
5. Choose Windows (SMB). Click Start to proceed with the installation.
6. Follow the instructions on the screen. When finished, click Close.