Filter
Top Products
Bluetooth Service
78
79
Configure the server:
1. From Windows Control Panel, double-click the Network icon.
2. On the Configuration tab, select TCP/IP-> Bluetooth LAN Access Server Driver (scroll down if
necessary).
3. Click Properties and select the IP Address tab.
• Select Specify an IP address
• Enter an IP Address (suggested value - 192.168.1.1)
• Enter a Subnet Mask (suggested value - 255.255.255.0)
4. Click OK to close each dialog box, and then click Yes to restart the computer.
Setup for Windows 2000 and Windows XP
If Internet Connection sharing was previously enabled (before BTW was installed) it must be
disabled and then
re-enabled before the Bluetooth network adapter can use it.
Configure for Internet/LAN:
Before you begin, verify that the:
• Bluetooth software is installed and enabled
• Bluetooth device is turned on