Filter
Top Products
Black Box Console Server user guide 120
5. Once the keys have been generated, you will be prompted to save your settings.
6. Each line which you require secure access to will have to be configured for
reverse ssh. Go to the appropriate line configuration setting to set the line service
to rev ssh
NOTE: the line will only support the SSH protocol which was selected in the
server configuration.
7. Save your line configuration settings and SSH protocol is now supported.
Required Information
To connect to a specific device you must know the following information:
• Ip address of Console Server device is connected to
• Port on Console Server device is connected to
• TCP socket number of port (by default port 1 will be 10001, port 2 10002, etc)