Filter
Top Products
Black Box Console Server user guide 205
Configuring SNMP support
To configure for SNMP support proceed as follows;
1. From the Main Menu select ‘network configuration’ and then ‘snmp’.
cli syntax:
set contact
set location
2. Select ‘snmp contact information’ to configure the SNMP sysContact and
sysLocation objects; an example screen is shown below:
add trap
delete trap
3. Select ‘edit traps’ to create up to four trap communities; an example screen is
shown below:
SNMP Trap messages generated by the unit will only be broadcast to hosts defined
by SNMP Trap communities.( note that the unit generates no enterprise specific
traps).
add
community
delete
community
4. Select ‘edit communities’ to create up to four communities; an example screen is
shown below: