Filter
Top Products
Black Box Console Server user guide 166
Menu
equivalent
Network Configuration - Gateway - Change Gateway
See also add gateway, delete gateway, show gateways
set host
user level:
admin
Use this command if you need to change the internet address of one of the hosts in
your host table.
Syntax set host hostname inetaddress
Menu
equivalent
Network Configuration - Host Table - Change Host
See also add host, delete host, show hosts
set line
user levels:
admin,
normal
Use this command to configure lines on the front-mounted RJ45 ports only. The
command cannot set:
the Admin Port line configuration; this is fixed.
An admin user can change the setup of any line; a normal user can change their own
line only. On login connections, changes to the terminal type or number of video
pages will take effect immediately. Other changes will take effect when a user next
logs in on the line.
Syntax set line line_number
[speed speed]
[parity parity]
[stop stop-bits]
[data data-bits]
[flow flow-control]
[pages pages]
[termtype term-type]
[dial dial-status]
[user user-name]
[nouser]
[service line_service]....followed by (optionally)
[raw/telnet/ssh][raw/telnet]
[hostname][cs_port][host_port]
inetaddress is the internet address of the target host or network.
status is one of: ‘active’ or ‘passive’.