Filter
Top Products
Black Box Console Server user guide 180
set slip line
user level:
admin
Use this command to configure SLIP on a line.
syntax setsliplineline_number parameter
where:
line_number may also be specified as * for all lines, or . for the current in-use line.
parameters are any from the list below:
The meanings and values of these parameters are explained in Introduction to SLIP and
PPP connections on page 74.
You can include multiple parameters in one line of syntax (up to a maximum of 100
characters).
Menu
equivalent
Line Configuration - Line Settings
See also show slip line
parameter syntax parameter name
lipaddr local ip address
ripaddr remote ip address
subnet subnet mask
mtu maximum transmission unit
priority interactive priority
transmit_parameters transmit parameters
icmp_suppress suppress icmp
vj_comp VJ compression