Filter
Top Products
Black Box Console Server user guide 163
rlogin
user level:
admin,
normal
This command will establish a connection with a host using the rlogin protocol.
Rlogin passes your login name to the host, so you are prompted for your password
only. If your unit’s login name exists in the ‘rhost’ file of the target login directory,
you won’t be prompted for a password. You will be logged straight in.
Syntax rlogin hostname/inetaddress [termtype termtype]
[user username]
Where:
Menu
equivalent
Sessions - Start telnet/rlogin
See also resume, show line, start, telnet
save
user level:
admin
This command enables you to save the configuration information of your unit
to FLASH (permanent, non-volatile) memory. Note that the save command
does not apply to language files or any other files downloaded into RAM
using the netload command. The writing to FLASH will take a few seconds and
during this time the unit will not respond to user input.
WARNING do not turn the power on/off while the unit is writing to FLASH memory.
Syntax:
save
See also netload, netsave
hostname/
inetaddress
is the hostname or internet address of the machine you want to log into.
termtype is your terminal type. By default a dumb terminal type is passed to the host.
When connecting to a UNIX host, you must define the termtype in
accordance with its UNIX TERM variable.
username is your login name on the target host if different to your unit’s login. You can
also use this argument to log in as someone else.