Filter
Top Products
Black Box Console Server user guide 199
show telnet
user levels:
admin,
normal
Use this command to show telnet parameters on a line. Note that telnet parameters
shown here apply only to line service types of:
Direct telnet
Silent telnet
The command also shows telnet parameters entered using the command set telnet.
Syntax show telnet line line_number
Where:
Menu
equivalent
not available in the text menus
See also set telnet
show time
user levels:
admin,
normal
This command enables you to show the time as measured by the real-time clock in
the unit; e.g.
time11:04:32
Syntax show time
Menu
equivalent
Main Menu - hardware
See also set date, set time, show date, show hardware
line_number is the serial line number connected