Filter
Top Products
Black Box Console Server user guide 197
show slip line
user levels:
admin,
normal
Use this command to show the SLIP configuration of a line. Admin users can show all
lines; users with normal level privileges can only display the configuration of their own
line.
For example:
syntax show slip line line_number
where
:line_number may also be specified as * for all lines, or . for the current in-use line.
parameters are any from the list below:
The meanings and values of these parameters are explained in Introduction to SLIP and
PPP connections on page 74.
Menu
equivalent
Line Configuration - Line Settings
See also set slip line
parameter syntax parameter name
lipaddr local ip address
ripaddr remote ip address
subnet subnet mask
mtu maximum transmission unit
priority interactive priority
transmit_parameters transmit parameters
icmp_suppress suppress icmp
vj_comp VJ compression