Filter
Top Products
Black Box Console Server user guide 156
netsave
user level:
admin
This command enables you to save two types of information to a file on a remote
host: the configuration of your unit and crash details.
Configuration information
The following information will be saved:
User Profiles, including passwords
Port Configuration
Host Table
Gateways
RADIUS details
Modems
SNMP
Information unique to this unit (name, ip address) will not be saved. Make sure you
have write permission to the file.You can use this configuration file to configure
other units. The configuration can subsequently be reloaded using the netload
command.
Crash information
When the unit has rebooted after a crash you can save crash information to a file on a
remote host. This information will be diagnostic data for use by Technical Support
personnel.
Syntax: netsave type hostname filename
where you replace the word ‘type’ with one of the following words:
and where
configuration the configuration of your unit
crash information associated with the last crash of the unit
hostname is one from the list of hosts defined in the unit host
table. Type ? to show the host table entries.
Select a host by typing its name, e.g. aristotle.
filename must include the path to the file e.g. /etc/xxxx/
config/...