Filter
Top Products
Black Box Console Server user guide 146
add modem
user level:
admin
Use this command to add modem details to the unit. You will want to add modems
which you want the unit to control.
Syntax add modem name init_string
Where:
Menu
equivalent
Line Configuration - Modems - Add Modem or Change Modem
See also: delete modem, show modems
Note To change modem details in the cli you must ‘delete’ the modem, then ‘add’ it again,
with the changed details.
add radius
user level:
admin
Use this command to add RADIUS authentication and accounting hosts to the unit.
Syntax add radius host type host name secret
Where:
Note You must have the host already entered in the unit’s host table; see add host on page
144. If not you will see a message saying that no host is configured.
Menu
equivalent
radius configuration - radius settings
See also: delete radius, set radius, set server, show radius
name is the name of your modem, e.g. usrobotics28.8, or a name you
wish to use, e.g. modem4. Do not enter spaces in the name; use the
underscore _ character; e.g. us_robotics_28.8
init_string is the initialisation string of the modem; see your modem’s
documentation.
host type is either authentication_host or accounting_host
hostname is the name of the RADIUS host
secret is the secret (password) shared between the unit and the RADIUS
host.