Filter
Top Products
Black Box Console Server user guide 194
show radius
user levels:
admin,
normal
Use this command to check the RADIUS settings of the unit:
Syntax show radius
The output of this command are the RADIUS settings of the unit (e.g.):
For details of these parameters, see Console Server, RADIUS configuration on page 51.
Menu
equivalent
radius configuration - radius settings
See also add radius, set radius, set server
show routes
user levels:
admin,
normal
Use this command to give you a better understanding of your network. It will also show
a single passive gateway configured using bootp. Below is an example:
Syntax show routes
Menu
equivalent
there is no menu equivalent