Filter
Top Products
Black Box Console Server user guide 52
4. Key a maximum of sixteen alphanumeric characters.
To change the secret you must delete the host and then add it again; when you add
a host you are prompted for a secret.The first host entered becomes the primary
authentication/accounting host, the next host entered becomes the secondary host.
You can enter a maximum of two hosts in each of the fields.
You must enter the same secret in the RADIUS host (see your RADIUS
documentation); the secret is not transmitted over the network. Note that to set
RADIUS authentication on/off, go to back to the Main Menu and select ‘server
configuration’. See Setting up an IP address on page 33.
5. Select ‘change radius settings’, you are presented with the following (shown in
the next picture):
The RADIUS parameters are described in RADIUS parameters description on
page 54.
6. When you have completed the form, press <return>. You will be presented
with the following display: