Filter
Top Products
Black Box Console Server user guide 128
AUI port
The port labelled AUI, on the rear panel, is a 15-way female D-type. Pin-outs are:
Note To use the AUI port on Console Server units equipped with Revision 2 boards you
need to select the AUI interface during initial configuration using CLI commands.
See Selecting AUI or 10/100 Base T interface on page 32.
Pin Signal Pin Signal
1 Ground/chassis link 9 Collision-
2 Collision+ 10 Data Out-
3 Data Out+ 11 Ground
4 Ground 12 Data In-
5 Data In+ 13 +12 volt
6 Ground 14 Ground
7 do not connect 15 do not connect
8 Ground