Filter
Top Products
Black Box Console Server user guide 170
set ppp line
user level:
admin
Use this command to configure PPP on a line.
syntax set ppp line line_number parameter
where: line_number may also be specified as * for all lines, or . for the current in-use
line.
parameters are any from the list below:
The meanings and values of these parameters are explained in Introduction to SLIP and
PPP connections on page 74.
You can include multiple parameters in one line of syntax.
parameter syntax parameter name
lipaddr local ip address
ripaddr remote ip address
subnet subnet mask
accm asynchronous character control map
mru maximum receive unit
security security
user user
password password
ruser remote user
rpassword remote password
ac_comp address/control compression
proto_comp protocol compression
vj_comp VJ compression
magic_neg magic number negotiation
ipaddr_neg ip address negotiation
cr_tmout ‘configure request’ timeout
tr_tmout ‘terminate request’ timeout
cr_retry ‘configure request’ retries
tr_retry ‘terminate request’ retries
nak_retry ‘configure nak’ retries
auth_tmout authentication timeout