Filter
Top Products
Black Box Console Server user guide 169
Any number or combination of the arguments can be used.
Examples:
set line 6 service silent telnet plato
set line 3 service reverse raw 1000
set line 9 speed 38400 modem in service bidir
homer 1000 900
You can set all lines to the same parameters by using the * asterisk character, e.g.
setline*speed38400dialin
will set all lines to this speed and dial values.
Menu
equivalent
Line Configuration - Line Settings
See also show line, add modem,
set location
user level:
admin
This command enables you to configure the SNMP sysLocation object.
Syntax set location location
See also set contact, show snmp
Routing determines whether RIP packets are sent over SLIP/PPP connections. Can be
set to None (off), send, listen or send & listen.
security This may be set to on or off to enable login/password authentication on
reverse telnet and other reverse type connections. The unit's stored user
database is always used for this authentication. The default setting is off.
This parameter is only available from the CLI.
line_name Name to help identify the line. Do not enter spaces.