Filter
Top Products
Black Box Console Server user guide 160
reboot
user level:
admin
This command will reboot the unit. You will be asked to confirm the reboot with the
following prompt:
save config to flash ROM y/n
If you press ‘y’ the unit will save your configuration, close all connections and then
reboot. If you press ‘n’ the unit will prompt you:
confirm reboot unit y/n
Press ‘y’ to reboot, ‘n’ to cancel.
For more information on how the unit reboots, see BOOTP, Appendix F BOOTP.
Rebooting does not reset the unit to factory default settings.
Syntax reboot
Menu
equivalent
Network Configuration - Reboot
See also show server
reset factory
user level:
admin
This command will reset the unit to its default values. The unit will save the factory
default settings to FLASH memory; this saving will take a few seconds. After this
period you will be logged out and presented with a new login prompt.
Syntax reset factory
Menu
equivalent
Network Configuration - Reset
See also reboot
reset line
user level:
admin
This command will reset the specified serial line(s) to the default line configuration.
Syntax resetline./n/*
Where:
. specifies the current line.
n is a specific serial line number.