Filter
Top Products
Black Box Console Server user guide 179
Any combination of the arguments can be used. Examples:
set server name stimpy
set server name stimpy tftp retry 2
set server internet 192.101.34.202 broadcast
255.255.255.254 ip_host 72.96.0.2
Menu
equivalents
server configuration
network configuration
See also show server, set date, set time, show hardware, reset factory
5 0020 SNMP Process
The SNMP process will be enabled on well-known
port 161 when the services flag is set to 0020.
6 0040 SPCD Process
The proprietary SPCD (Trueport) process will be
enabled on port 668 when the services flag is set to
0040.
break The break option can be set to either on or off. This
option will enable/disable proprietary inband SSH
break signal processing as well as the existing Reverse
Telnet break signal. The OEM_mode flag 0010 will be
set/reset based upon this command. This configuration
parameter will be saved when the configuration is
saved to FLASH.
sshbreakstring The sshbreakstring can be set up to 8 characters which
defines the break string used for inband SSH break
signal processing. The default is set to '
~break', where
~ is tilde. A break signal in generated on a specific
serial port only when the server's break option is
enabled and the user currently connected using reverse
SSH has typed the break string exactly.