Filter
Top Products
Black Box Console Server user guide 66
Restoring factory default settings
Resetting to factory defaults using software
This feature enables you to reset the unit to its default settings. This will clear all
configuration data entered by the admin user, and all user accounts, except the
default admin user, will be deleted.
To reset to factory default settings from within the software (cli syntax: reset
factory):
1. From the Network Configuration menu, select ‘Reset’.
You will be asked to confirm the reset:
2. At the prompt, type ‘y’ to reset the unit, or ‘n’ to cancel the command.
Resetting to factory defaults using reset switch
To reset to factory defaults using the reset switch, proceed as follows;